FAS series couplings – type I – size 201 1/2 – 207

Application: Designed to meet the demands of harsh operating conditions and accommodate large shaft sizes up to 49 inches in diameter. Primarily used in tandem pairs connected by an intermediate floating shaft, or individually in conjunction with a driving or driven shaft supported by a self-aligning bearing. When used individually, it only compensates for angular misalignment. Description: Shares the same basic design features as the FS Series (sizes 200 to 207), but offers an angular misalignment capacity of ± 3/4°. Major components are fully machined from medium carbon steel.

Application: Used in applications where peak torque or high shock loads exceed the normal maximum starting torque. Coupling halves are mounted on one or both sides of a shear pin assembly to compensate for all types of angular misalignment and axial displacement. The shear pins are designed to fail at a predetermined value to protect the connected equipment from damage. Description: The Amerigear FPH and FSPH Series shear pin couplings feature a shear assembly bolted between the flanges. The shear assembly consists of two fully machined plates, two lubricated and sealed angular contact thrust bearings, a retaining ring, retaining bolt and pin, shear pins, and setscrews.

Application: Designed to meet the demands of harsh operating conditions and accommodate large shaft sizes up to 46 inches in diameter. Capable of compensating for all three types of misalignment (angular, parallel, and axial). Description: Shares the same basic design features as Series F (sizes 200 to 207), but offers a misalignment capacity of ± 3/4°. Major components are fully machined from medium carbon steel.