TeSys D - interface amplifier module - relay - 24 V DC / 250 V AC

TeSys D - interface amplifier module - relay - 24 V DC / 250 V ACTeSys Deca low signal interface module, for control of contactors LC. D09 D115 (3P). Electromechanical relay interface controlled by a 24V DC input signal. To be used with contactors with 24 250V AC coils (B7 to U7). To be mounted on a coil wiring adapter LAD4BB for contactors LC. D09 D38, LAD4BB3 for contactors LC. D40A D80A, and directly on contactors LC. D80 D115. Green Premium compliant (RoHS REACh). Product Highlights Meet the need for transfer

The nominal discharge current (impulse 8-20 µs) is 25kA with a maximum of 40kA

75kW/1hp for applications requiring slight overload (up to 120%)

for connection to the coil circuit of contactors LC1D40A-D80A

Wide range of power terminal accessories

The rated short circuit breaking capacity goes up to 15kA at 230VAC to 400VAC conforming to EN/IEC 60947-2 standard

The endurance is 30000 operations with AC22 current category under cos phi=0

Switch Disconnector Masterpact Nw10Na 1000 A 690 V 3 Poles Drawout

This is a 3 poles basic frame for ComPacT NSX160H

This Acti9 iIL is a single-phase voltage presence indicator light

1NC fault signaling contact + 1NO instantaneous auxiliary contact

EasyPact EZC device can be equipped with 1 SHT auxiliary (for 2 poles) or 2 SHT auxiliaries (for 3 and 4 poles)

Cable Interlocking Adaptation Fixture for Masterpact Nt Drawout