EVSE adapter to allow 14-50 plug equipped EVSE's to plug into common 15amp and 20amp 120 volt wall outlets - Adapter #83

EVSE adapter to allow 14-50 plug equipped EVSE's to plug into common 15amp and 20amp 120 volt wall outlets - Adapter #83Plugs into common 15amp and 20amp 120 volt wall outlets. Allows you to plug your 14 50 plug equipped EVSE into standard NEMA 5 15 or 5 20 outlets. 20amp outlets typically have one straight slot and one "T" shaped slot. The "T" shaped slots indicates backward compatibility with 15amp plugs. This is what allows Adapter #83 to fit into two different sockets. Constructed with heavy cable for use on 15 and 20 amp circuits. Note: Your EVSE must be 120 volt

It has a 6-50 plug and a 6-30 box type outlet

changes colors for different states

Another amazing custom adapter

that unit offers manual switching between outlets or adding the Delay Controller Upgrade Pak to the Dryer Buddy® Plus AUTO

it plugs into a NEMA 10-30 outlet (30amp 240volt)

state information & quick access to settings

electric vehicle charger

This is a 40amp cable for 32amp continuous or lower load following the NEC's 80% rule of thumb

3" (160 mm)

lights or any loads that can run for more than 3 hours then those are deemed continuous loads and you will need to limit your total load on each Outlet to 16 amps or 3840 watts continuous

Housed in a solid 8x8x4 PVC gray box with configurable rear mounting tabs

Pictures shown are of the case before construction